Fender Eliminator Triumph Bonneville T120/T100

If you are in the market for a Bonneville T100/T120 fender eliminator kit there are a few key points to consider.

1/ First and foremost. Is the kit designed specifically for the bike. Or is it a one size, kind of

fits all?

2/ Is the kit compatible with a grab rail or rack?

3/ How is the kit designed?

4/ What it's construction, material and finish?

5/ Are turn signals offered in kit of quality and serviceable?

                     Maund Speed kits are 1/ Designed specifically for Bonneville T100 / T120 2/ Compatible with grab rails and racks 3/ Design is a 2 piece construction consisting of a light/signal mount and underseat mud pan.

4/ Cast aluminum and stainless construction. Powder coated or satin brushed light

mount.

5/ Turn signals have die cast aluminum bodies, 35mm lens, polished and black finish. They are fully serviceable. Spare lens in amber, clear and smoke are always in stock.

Replacement 960 lumen LED bulbs are optional extra.

Choose from Triumph O.E.M mount front turn signals or 10mm mount signals (10mm are an economical option if you are happy to slightly enlarge the mounting hole with a drill).

Both options of front signals come with plug play connectors.

ASSEMBLY

1/ Disconnect connector plug for fender harness.

2/ Remove 4 fender bolts with T30 driver.

3/ Eliminate fender.

4/ Install tail lamp and signals to bracket.

5/ Position stainless mudguard and loosely attach nuts to forward 2 bolts.

6/ Align lamp bracket, with the mudguard nesting inside bracket. Using 2x oem bolts, stainless washers and nyloc nuts supplied. Loosely attach.

7/ Remove rear screw from seat latch with T30 driver. Replace with stainless screw supplied, aligning with hole in lamp bracket. Then secure using 6mm nut and washer supplied. Snug up. Do not over tighten.

8/ Fully tighten 4 previously installed fasteners.

9/ Connect wires   Connecting Specific lamps is explained below.

 Q/C Harness                 Connects to

BLACK ....................................GROUND -

BROWN...................................TAIL LIGHT+

ORANGE..................................BRAKE +

BLUE........................................R/H TURN +

RED..........................................L/H TURN +

BLACK DUAL CONNECTOR .........SIGNAL GROUND -

Turn Signals

BLACK.........POSITIVE +

BLACK/WHITE .......NEGATIVE -

LED Turn Signals 8mm

BLACK....................GROUND -

YELLOW.................POSITIVE +

Tail Lamp Connections

Lucas 525

BLACK / WHITE.................GROUND -

BLACK................................TAIL LIGHT +

RED.....................................BRAKE +

LED Smoke Miller Stop and LED Red Lens

BLACK..................GROUND -

BLUE.....................TAIL LIGHT +

RED.......................BRAKE +

Hooking up to stock harness on Thruxton 1200, Bonneville or Street Twin/Cup or Scrambler this is what you need know.

BRAKE LIGHT + ............GREEN/PURPLE

TAIL LIGHT +.................YELLOW

R/H TURN +...................GREEN/WHITE

L/H TURN +...................GREEN/RED

GROUNDS- .....................BLACK